This repeater is located in the south-west part of town. It has a DB-224 antenna
mounted at the 100ft. level of a 110ft. tower with a ground elevation of 312ft. The repeater is a Mastr Exec II converted to the ham band with a Sinclair duplexer. Transmitter output is 25 watts. It has a weather radio alert system and a weather station for monitoring the weather. It also has an open autopatch. It is controlled by a CAT-1000B controller with a DR-1000 card and a WX-1000 weather receiver. Here are the feature codes::
For time key up and press 80
For tempature press 81
For repeater weather conditions press 82
For keypad test press 5 then keypad buttons
For receiver test press 600 star.
To bypass PL tone press 325, the repeater will say "OK UP" after several minuets of no talking it will revert to PL
Autopatch controls
To start an autopatch press star then the phone number.
To stop an autopatch press pound
During an autopatch, if you hear a beep (that is the auto cutoff feature) just keyup for an instant to reset the timer.
This repeater is also located south-west of town on the same tower and height as 145.190.
It also is a Mastr Exec II with a cellwave duplexer and 7/8" hardline to a DB-408 antenna.. Transmitter output is 20 watts. This repeater will soon be hooked up to EchoLink. It is controlled by a CAT-200 controller.
Here are the feature codes:
For keypad test keyup and press 5 then keypad buttons.
To bypass PL tone press 325, the repeater will say "OK UP",after several minuets of no talking it will revert to PL
Echolink codes
Command DTMF Tones
Connect 20 + node #
Disconnect #
Play Infomation *
Random node or repeater 00
Random Link 01
Random Conference 02
Randon User 03
Link Status 08
Reconnect to last contact 09
These repeaters are located on the west side of town on James Harringtons tower.
The 147.120 has a DB-224 antenna at 300ft. The 444.350 has a DB-420 at 300ft.
The 147.120 is a Vertex VXR-9000 with a CTCSS tone of 94.8hz. and uses a Wacom duplexr. The 444.350 is two GE MVP mobile's converted to the ham band and use a cellwave duplexer. Both repeaters use CAT300DX controllers.The 70cm repeater has a autopatch. Here are the feature codes for both repeaters:
On the UHF Repeater
For keypad test keyup and press 5 then keypad buttons.
For time press 80
To bypass the PL tone keyup and press 325, the repeater will say "OK UP" and after serveral minuets it will revert to PL.
Autopatch uses the same codes as the 145.190 repeater.
This repeater is located in the south-west part of town. It has a DB-224 antenna
mounted at the 100ft. level of a 110ft. tower with a ground elevation of 312ft. The repeater is a Mastr Exec II converted to the ham band with a Sinclair duplexer. Transmitter output is 25 watts. It has a weather radio alert system and a weather station for monitoring the weather. It also has an open autopatch. It is controlled by a CAT-1000B controller with a DR-1000 card and a WX-1000 weather receiver. Here are the feature codes::
For time key up and press 80
For tempature press 81
For repeater weather conditions press 82
For keypad test press 5 then keypad buttons
For receiver test press 600 star.
To bypass PL tone press 325, the repeater will say "OK UP" after several minuets of no talking it will revert to PL
Autopatch controls
To start an autopatch press star then the phone number.
To stop an autopatch press pound
During an autopatch, if you hear a beep (that is the auto cutoff feature) just keyup for an instant to reset the timer.
This repeater is located in the south-west part of town. It has a DB-224 antenna
mounted at the 100ft. level of a 110ft. tower with a ground elevation of 312ft. The repeater is a Mastr Exec II converted to the ham band with a Sinclair duplexer. Transmitter output is 25 watts. It has a weather radio alert system and a weather station for monitoring the weather. It also has an open autopatch. It is controlled by a CAT-1000B controller with a DR-1000 card and a WX-1000 weather receiver. Here are the feature codes::
For time key up and press 80
For tempature press 81
For repeater weather conditions press 82
For keypad test press 5 then keypad buttons
For receiver test press 600 star.
To bypass PL tone press 325, the repeater will say "OK UP" after several minuets of no talking it will revert to PL
Autopatch controls
To start an autopatch press star then the phone number.
To stop an autopatch press pound
During an autopatch, if you hear a beep (that is the auto cutoff feature) just keyup for an instant to reset the timer.
